Refill Instructions

1. Remove the cartridge from the printer. During the refill process, ink may surface from the printhead; hold cartridge over sink or waste basket.
2. Remove nozzle cap. Locate the center refill opening of the green arrow on cartridge (see illustration.) Insert nozzle into refill opening Don't be concerned if you feel some resistance; this is due to "filler material" inside the cartridge.
   NOTE: If you are refilling a 51633A cartridge you will need to apply additional downward pressure when inserting nozzle into refill opening.
3. Slowly squeeze the refill dispenser, allowing ink to flow into the cartridge. Stop if ink bubbles out of the refill opening.
4. After refill, lay cartridge on its side with green arrow facing up. After 5 minutes, place the filled cartridge back onto its position in the printer.
5. Run approximately 5 pages of text to achieve consistent printing.

IMPORTANT:

1. Do not allow cartridge to run dry. It is recommended that you periodically add ink.
2. Do not rest cartridge on any of its metal surfaces.
3. Be sure to blot excess ink from printhead before placing cartridge into printer.
4. Each ink refill dispenser contains more than enough ink to refill an empty cartridge. Stop filling if ink bubbles out of the refill opening. Blot away excess ink with a soft tissue. After each use, replace cap over refill nozzle and store remaining ink for future use.

Copyright 2001 Ko-Rec-Type® | Trademark Information
Products | Ink Jet Printer supplies | Laser Printer Supplies | Fax & MFP Supplies
Typewriter & Printer Ribbons | Photocopier Supplies | Correction Supplies | Product Finder
Where to Buy | Help Desk | Company Overview | For our Dealers | Contact Us